Топливный базис ARJES 0,27 л/т сочетает дизели Volvo Penta Stage V с тихоходными гидростатическими мультипликаторами момента, что даёт расход 14 л/ч при 75% нагрузке — против двигателей CAT C13/C15/C18 с показателем 0,35+ л/т при 45+ л/ч. Для стационарного режима Impaktor 1250 E (500 кВт, два VFD-электродвигателя) снижает стоимость энергии за жизненный цикл до 480 000 EUR против 675 000 EUR для 400-кВт дизеля — дельта 195 000 EUR за 10 000 ч, независимо от накладных расходов на обслуживание ДВС (DPF, SCR/AdBlue, замены масла).
| Метрика | ARJES | Конкурент | Δ |
|---|---|---|---|
Топливный базис | 0 L/t | 0 L/t | ▲ |
Мощность двигателя | 129 kW (250 EVO II) – 400 kW (1000) | 310 kW (CAT C9.3 / Pronar) – 450 kW (CAT C18 / Komptech T6000) | = |
Расход при 75% нагрузке (л/ч → л/т нормализованный) Коэффициент нагрузки: 75%. Базовая производительность ARJES: 52 т/ч C&D (Impaktor 350 EVO II). Базовая производительность конкурента: 128 т/ч (Komptech T6000 на лёгком C&D). Л/т = (л/ч × коэфф. нагрузки) / производительность. | 14 | 45 | ▲ |
Стоимость энергии за 10 000 ч — дизель | €189,000EUR / 10k h | €675,000 | ▲ |
Стоимость энергии за 10 000 ч — электричество | €480,000EUR / 10k h | N/A (no electric variant — UNTHA XR requires HV cable) | ▲ |
Дельта арбитража электричество vs дизель (EUR / 10 000 ч) | €195,000EUR / 10k h | Baseline (0 EUR — no electric option) | ▲ |
Накладные расходы на обслуживание ДВС | Zero (1250 E electric) / minimal (Volvo Penta Stage V) | DPF + SCR/AdBlue + oil changes (CAT C13/C15/C18) | ▲ |
Предотвращённая CO₂ за 10 000 ч (электричество vs дизель) | 480 t | 0 t CO₂ prevented (full diesel burn) | ▲ |
AXE Machinery d.o.o. is an independent authorized dealer of ARJES recycling machinery. AXE Machinery d.o.o. is NOT affiliated with, endorsed by, sponsored by, or in any way officially connected with Doppstadt GmbH, Hammel GmbH, Lindner-Recyclingtech GmbH, Terex Corporation, Sandvik AB, Metso Outotec, Morbark LLC, or any other manufacturer referenced in this comparative analysis. All third-party company names, product names, and trademarks are the property of their respective owners and are used solely for technical comparison and identification purposes under the fair-use doctrine.
All third-party trademarks, service marks, and trade names referenced on this platform — including but not limited to Doppstadt®, Hammel®, Lindner®, Terex®, Sandvik®, Metso®, Morbark®, Komptech®, UNTHA®, TANA®, and Pronar® — are the property of their respective owners. References to these marks are made solely for technical comparison, identification, and commentary purposes under the fair-use doctrine. Such references do not imply endorsement, sponsorship, affiliation, or partnership. AXE Machinery d.o.o. respects all intellectual property rights and will promptly address any concerns raised by trademark holders.
All performance metrics (KTQ uptime, fuel burn, throughput, torque, clog-rate) are derived from controlled test conditions documented per AXE internal protocol registry. Each metric is cross-referenced to a methodology ID, applicable ISO/ASTM/DIN standard, test date, and verifier identity. Test conditions include specified feedstock (e.g. concrete B25-B45 with rebar ≤32 mm), ambient temperature, operator profile, and observation window. Actual field performance may differ; contact AXE Machinery d.o.o. for a region-specific TCO analysis tailored to your operational profile.
Per Google's E-E-A-T (Experience, Expertise, Authoritativeness, Trustworthiness) guidelines, every quantitative claim on this platform is traceable to a primary source. Click any ℹ badge next to a metric to view: methodology ID, ISO/ASTM standard reference, test protocol revision, controlled test conditions, ISO-8601 test date, verifier identity, and verification status (self-verified / third-party / pending).
